Last Updated on 2 February, 2023
Colony Survival Clay Location & Mining Guide – All the steps, locations and tips to get all the clay you need in less than a minute
Colony Survival Clay Location & Mining Guide – How to Mine Clay?
The clay is extracted from the Clay Ore. The Miner can extract Clay from the Clay Ore block, while the Player can only destroy it. But the most important thing is that you know that if you destroy the Clay Ore block you will only get one Clay, while if you extract it without destroying the block, you can get infinite Clay from a single block. So in order not to waste Clay Ore blocks, make sure to extract Clay from the Clay Ore block with the Miner.
Miner job: Mining is a job that you can be assign to colonists. To place the job, left click with the command tool and select the “Miner” role. If you are going to put a miner to work It is recommended to place a crate nearby so that they can access the stockpile.
Colony Survival Clay Location & Mining Guide – Location
All oreblocks are always found at a certain depth below the surface. And all the Oreblocks can be grouped in one of the four possible layers. In Clay ore block it is found in the second layer, commonly known as the Iron Layer. Specifically, its exact depth is 17, the same as the Copper Ore
Finally, we leave you this Super Gaming video guide where you can see how to put everything we have told you into practice. It is much easier than it seems, it takes the youtuber just over a minute to start extracting Clay
We hope we have resolved all your doubts about Clay and its extraction.